Quality Waterjet Newsletter

• 01/05/10: Cleanability Factor
• 09/08/09: Safe Distance of Waterjets and Abrasive Suspension Jets
• 06/23/09: Hydro-Demolition of Concrete Surfaces
• 04/21/09: Fundamental Aspects in Waterjet Cleaning
• 01/20/09: Deburring with Waterjets
• 12/09/08: Noise Characteristics of Abrasive Waterjets
• 10/07/08: Cutting Hollow Structures
• 08/06/08: Advantage of Hydrodemolition on the Bond Strength of Concrete Overlay
• 06/24/08: Effectiveness of Helmet and Face Shield For Waterjetting Protection
• 05/13/08: CFD Simulation of Particle Acceleration in an AWJ Cutting Head
• 04/08/08: Effect of Temperature on Cavitating Jet
• 03/11/08: Forming and Welding Using a High Speed Liquid Impact
• 02/12/08: Effects of Waterjet Cleaning on Surface Preparation
• 01/15/08: Pressure Fluctuation and Control of Intensifier Pumps
• 12/18/07: AWJ Industry Snapshot: A Personal View
• 11/13/07: Testing of NPT and NPTF Connections
• 10/16/07: Dental Waterjets
• 09/25/07: Coating Removal Parameters
• 09/04/07: Machinability Determination in AWJ Cutting
• 08/07/07: Low Pressure (5-20 kpsi) AWJ Cutting
• 07/17/07: Determination of Intensifier Pump Efficiency
• 06/26/07: Burst Pressure of High Pressure Tubing
• 06/05/07: Tailoring with High Pressure Waterjets
• 05/22/07: Deep Hole Drilling with AWJs
• 05/08/07: Finishing Artificial Joint with Waterjets
• 04/24/07: Optimal Standoff Distance in Waterjet Cleaning
• 04/10/07: Monitoring AWJ Cutting Using Infrared Thermography
• 03/20/07: AWJ Cutting of Engineering Plastics
• 03/06/07: Optimum Water-Blasting
• 02/20/07: Forced Pulsed Waterjets for Cleaning
• 02/06/07: Electrostatic Charge Generation in Waterjet Systems
• 01/23/07: Impact of Abrasive Type on AWJ Cutting Efficiency and Nozzle Wear
• 01/09/07: Safety of Waterjets for Demilitarization
• 12/05/06: Fan Jet Characteristics
• 11/14/06: AWJ Cutting of Glass Fibre Reinforced Composites - Delamination Issue (Or MS Word format)
• 10/31/06: Innovative Uses of AWJs for Glass Artworks
• 10/10/06: Abrasive Contamination on AWJ Cut Surfaces
• 09/26/06: Enhanced AWJ Cutting Through Modulation
• 09/12/06: Cost Analysis of AWJ Cutting
• 08/29/06: Waterjetting Effects on Concrete Moisture Level
• 08/15/06: Ice Blasting for Food and Biomedical Applications
• 08/01/06: AWJ for CRT Disassembly
• 07/18/06: AWJ for Surface Finishing of Marble
• 07/04/06: AWJ Cutting of Thick Materials
• 06/13/06: Pressure Limits of Tapered Pipe Thread Connections
• 05/30/06: Recycling Abrasive for AWJ Cutting (Full Paper, courtesy of Professor O.V. Krishnaiah Chetty)
• 05/16/06: New Design of High Pressure Valves
• 05/02/06: A Study on Using Olivine Moulding Sand for AWJ Cutting
• 04/18/06: Waterjet Dismantling of Automobile Tires
• 04/04/06: Review of an AWJ Market Survey
• 03/21/06: A Non-conventional Design of Intensifier Pumps
• 03/07/06: An Earlier Study on Waterjet Cutting Applications
• 02/21/06: Development of the 1st Commercial Waterjet Cutting System
• 02/07/06: Safety Issues in Waterjet Job Shops
• 01/24/06: An Explosive-Driven Jet for Fire-Fighters
• 01/10/06: Book Review: "Abrasive Waterjet Machining of Engineering Materials"
• 12/13/05: Cutting Screws Out of Bones with an AWJ
• 11/29/05: Material Behaviors under the Impact of Waterjets
• 11/08/05: Avoid "Cutting" When Cleaning
• 10/25/05: Cutting of Microelectronic Components With AWJ
• 10/11/05: Cutting of Microelectronic Components With AWJ
• 09/27/05: A Hybrid Pump of Direct Drive and Intensifier
• 09/13/05: Hard-Coating Removal with an Abrasive Waterjet
• 08/30/05: Waterjet At Surgeon's Hand
• 08/16/05: New Cost-Effective 40K psi Direct Drive Pumps
• 08/02/05: Abrasive Waterjet Cutting of Aerospace Materials
• 07/19/05: Review On Surface Preparation with Waterjets -- Part Three
• 07/05/05: Review On Surface Preparation with Waterjets -- Part Two
• 06/21/05: Review On Surface Preparation with Waterjets -- Part One
• 06/07/05: A Tip for Lead-in/Lead-Out in Abrasive Waterjet Cutting
• 05/24/05: Submerged Cutting or Not
• 05/10/05: Abrasive Waterjet as a Glass Artist's Tool
• 04/26/05: Pure Waterjet Cutting with a Coherent Stream
• 04/12/05: How to Measure Waterjet Cut Parts?
• 03/29/05: Does Abrasive Waterjet Cutting Cause Surface Hardening?
• 03/15/05: The Impact of Pressure Fluctuation on Surface Finish
• 03/01/05: Autofrettage and Fatigue
• 02/14/05: Waterjet Component Life and Fatigue